ORION LED Wandleuchte | Schwarz | Aluminium

Yes, the light comes with built-in LEDs and is ready for immediate use. You don't need to buy any extra bulbs but can install and use the lamp straight away. The LEDs have a very long service life of 50,000+ hours and are covered by our 3-year guarantee.

Yes, you can return all our lamps within 14 days and will receive a full refund within a few days. For a stress-free return process, you can register your return in our returns portal and you will always be informed about the status of your return.

The Orion cable connection luminaire can be made dimmable by replacing the triac transformer. This can be easily replaced using a click system. You can purchase the appropriate transformer from us. Simply contact our customer support team. The lights can then be dimmed by trailing edge. The Orion rechargeable version can only be dimmed using a touch sensor on the luminaire (front and back) or by remote control including motion sensor.

The Orion cable connection version can be made SmartHome-capable by replacing the transformer. This can be easily replaced using a click system. To do this, the transformer must match the technical requirements of the transformer installed. The Orion battery version cannot be made SmartHome compatible.

The Orion with cable connection does not have a motion detector. However, it is possible to select a suitable motion detector yourself and integrate it into the luminaire. However, the technical requirements of the luminaire must be taken into account. We cannot recommend a suitable motion detector. The Orion rechargeable version, on the other hand, has a motion sensor integrated into the remote control. This remote control can be placed anywhere so that the light switches on automatically as soon as someone walks past the remote control within a maximum of 5m. The remote control can hang up to a maximum of 10m away from the light.

The battery life is up to 10 hours at 100% brightness and up to 26 hours at 50% brightness. The charging time from 0-100% is around 10 hours.

Using the remote control: Three modes can be selected using the slide switch on the side: - OFF: Switches the remote control off completely - MAN: Enables the light to be switched on and off using the I or O button. In addition, the brightness can be dimmed or brightened continuously by holding down the I button to adjust the lighting individually. - AUT: Activates the motion sensor mode. In this mode, the light switches on automatically as soon as movement is detected

Pairing remote control and luminaire:1. set the remote control to AUT.2. press and hold I and O together on the remote control and simultaneously press and hold the touch sensor on the luminaire until the remote control sensor lights up blue and the lamp flashes twice. Then the pairing is successfulRepeat the process to unpair the light from the remote control. If decoupling is successful, the remote control sensor lights up blue once: A luminaire can be operated with three different remote controls almost simultaneously. A remote control can be paired with several lights. To do this, go through the pairing process.

A card with a QR code is included in your delivery. This will take you to the assembly instructions.