PONTOS LED wall light | Chrome | Dimmable

Yes, the light comes with built-in LEDs and is ready for immediate use. You don't need to buy any extra bulbs but can install and use the lamp straight away. The LEDs have a very long service life of 50,000+ hours and are covered by our 3-year guarantee.

The high-quality LEDs are permanently installed in the luminaire. However, experience has shown that it is the transformers and not the LEDs that tend to break in LED luminaires. These can be replaced quickly. If you have any problems in this regard, we will of course help you.

Yes, the brightness can be adjusted in 3 levels by pressing the wall switch several times.

Our lights are not smart home-compatible as standard. However, you can connect them to a smart home system. To do this, you need to replace the installed transformer with a suitable Smart Home transformer. Make sure that the new transformer meets the technical requirements of the previous transformer. Our lights are controlled via constant current. The Smart Home system must therefore be designed for constant current luminaires. Constant voltage systems are not compatible with our lights. If you want to continue to adjust the color temperature (warm to cool white), the Smart Home transformer must be CCT-capable.

Yes, you can return all our lamps within 14 days and will receive a full refund within a few days. For a stress-free return process, you can register your return in our returns portal and you will always be informed about the status of your return.

Yes, our remote lights have a memory function that can be used to save a setting. To activate it, you must wait at least 20 seconds between switching off and on using the wall switch. When operated with the remote control, the previous setting is always saved.

A card with a QR code is included in your delivery. This will take you to the assembly instructions.

Lights with IP20 may only be used in the bathroom outside the protected areas. This means they are not suitable for direct use in the shower or bath. However, they can be used in dry areas such as in the middle of the room or on the ceiling. For greater safety, we recommend luminaires with at least IP44 in the bathroom.

Unsere Leuchten sind standardmäßig nicht TRIAC dimmbar. Du kannst sie aber TRIAC dimmbar machen. Dafür musst du den verbauten Trafo gegen einen passenden TRIAC-Trafo austauschen. Achte darauf dass der neue Trafo die technischen Anforderungen des bisherigen Trafos erfüllt. Unsere Leuchten werden über Konstantstrom (constant current) gesteuert. Der TRIAC Trafo muss also für Konstantstromleuchten ausgelegt sein. Konstantspannungs-Systeme sind nicht kompatibel mit unseren Leuchten. Außerdem muss der Trafo die Mindestanforderungen der LEDs erfüllen (Watt und Spannung).

Our luminaires do not have an additional outlet for a cable duct in the wall or ceiling plate as standard. They are designed to be mounted directly on the existing power connection.

If your power connection is not exactly where you want the luminaire to be, you can always drill a hole in the wall or ceiling panel of the luminaire to run a cable duct and mount the luminaire in an offset position.

Please note, however, that we do not accept any warranty for subsequent drilling. In addition, the luminaire cannot be exchanged after such a modification.