HADES LED Element | White | Click & Connect

At the ceiling mount and at the cable holders, each suspension wire is guided through a small locking pin. Press the pin in with one finger while pulling on the suspension wire with your other hand, or feeding the wire back into the housing, to change the hanging height of the lamp. Thanks to this mechanism, you can still adjust the hanging height even after the lamp has already been installed.

Yes! The lamp comes with built-in LEDs and is ready to use right away. You don't need to buy any additional bulbs – you can simply mount the lamp and start using it. The LEDs have a very long lifespan of over 50,000 hours and are covered by our 3-year warranty.

The high-quality LEDs are permanently installed in the lamp. In our experience, however, it is usually the transformers rather than the LEDs themselves that are affected by defects in LED lamps. These can generally be replaced quickly. If you ever have any problems with this, we will of course be happy to help you.

No! The luminaire is intended as a kind of ambient light. It is therefore not necessary to dim the light.

You have a 30-day right of return with us.

Return policy: In the event of a complaint, we will of course cover the return costs for you and refund the full amount.

As we are a young, self-financed company and already bear the shipping costs to you, unfortunately we cannot also cover the costs of a regular return. If you send your lamp back within 30 days, you will receive the refund amount minus the return shipping costs.

For a stress-free return process, you can simply register your return via our returns portal. There you can keep track of the current status of your return at any time.

Our lights are not smart home-compatible as standard. However, you can connect them to a smart home system. To do this, you need to replace the installed transformer with a suitable Smart Home transformer. Make sure that the new transformer meets the technical requirements of the previous transformer. Our lights are controlled via constant current. The Smart Home system must therefore be designed for constant current luminaires. Constant voltage systems are not compatible with our luminaires. Non-dimmable LEDs are installed in the Hades luminaire. This means that you can only switch them on and off via the smart home system but not dim them. We cannot recommend a suitable smart home transformer for the HADES luminaire.

A card with a QR code is included in your delivery. This will take you to the assembly instructions.

No. Non-dimmable LEDs are installed in the Hades. This means that you cannot make them TRIAC dimmable by replacing the transformer.

Lights with protection rating IP20 may only be used in the bathroom outside the protected zones. This means they are not suitable for direct use in the shower or above the bathtub. In dry areas, for example in the middle of the room or on the ceiling, they can however be used. For added safety, we recommend lights with at least protection rating IP44 in the bathroom.

The installed cable is 2-wire and has a conductor cross-section of 0.3 mm^2. It is cable type F829/VDE, has a maximum voltage of 300/500 V and is temperature-resistant up to 180 degrees.